Pallet Racks in Tarpon Springs, FL

Tarpon Springs Industrial Park on L and R Industrial Blvd off US Alt-19 runs about 83,000 square feet across several buildings, with small-bay units, 12 to 14 foot roll-up doors and a fenced outdoor storage yard. Anclote Industrial Park on Anclote Road and Wesley Avenue and Riverbend Business Park on Brady Road are the other main pockets, mostly 1980s and 1990s buildings with around 20-foot clear and drive-in doors.

The tenant mix is construction, automotive, marine and contractor trades, linked to US-19 by Pinellas Avenue. The North Pinellas submarket has led the region in rent growth, which tells you how little space is available. When you cannot get more building, the rack plan has to do the work.

Cantilever for Marine and Building Materials

Marine suppliers, lumber yards and pipe distributors all share the same problem: long material that will not sit on a pallet. Cantilever rack holds it on arms with no front uprights in the way, so bundles load and pick cleanly with a forklift.

We size arm length, arm spacing and column height to your bundle weights and lengths, and we can lay out the yard so outdoor and indoor storage work as one system.

Small Bays with Drive-In Doors

In a 20-foot clear small bay with a drive-in door, the rack plan starts at the door. We keep a clear path from the door to the rack rows, set two to three beam levels, and use shelving along walls for hand-picked parts.

Boat-parts and contractor suppliers usually mix pallets and loose stock, so the layout zones each storage type instead of forcing everything onto one rack.

Getting More From Space You Already Have

With North Pinellas space this tight, most tenants stay put and reorganize. A measured re-layout, tighter aisles matched to your truck, and the right mix of rack and shelving typically recovers a meaningful share of the floor.

Quoting a Small Bay Properly

Small bays leave no room for guessing. We measure the bay, the doors and the clear height to the lowest obstruction, then draw storage to scale.

Pallet dimensions and load weights set beam capacity; bundle lengths and weights set cantilever arm spacing. Both come in writing with the quote.

If you share how product moves on a normal day, we will draw the layout around that flow instead of against it.

A Short Drive From Clearwater

Tarpon Springs is a quick run up US-19 or Alt-19 from our Clearwater location, so measuring visits and phased installs schedule easily.

For marine and contractor suppliers, we can draw the yard and the bay in one plan and quote both together.

Tarpon Springs Pallet Rack FAQs

Serving Tarpon Springs From Clearwater

Located in Clearwater, we serve the entire Pinellas County area with industrial pallet racks and warehouse storage solutions.